Wismec Reuleaux Tinker 2 Waterproof Kit 200W Instructions

Wismec Reuleaux Tinker 2 kit Instructions

Overview

Wismec Reuleaux Tinker 2 Waterproof kit is the ideal kit which is powered by dual 18650 batteries. The kit has the output of reaching 200W with the assistance of efficient working modes with VW/TC. The box mod is designed as such that its features are waterproof. The IP67 can provide 100% protection against sand and dust. This vape starter kit can work for 30 minutes under more than 15cm to 1m depth of water. To ensure safe vaping, there are several protection options. The tank comes with an e-juice tank that is 6.5ml. Users can quickly fill the container to the top and enjoy a day full of secure vaping experience. The 0.35ohm head has WT01 Single head and Dual 0.2ohm head of WT02. This ensures excellent flavor with neat and crisp hits.

Wismec Reuleaux Tinker 2 kit Features

• Avatar Chipset
• 18650 Dual High-Amp Batteries (not available in the kit)
• Stainless Steel Wire, Ni200, Titanium options
• Chassis made up of Zinc-Alloy
• Dustproof, waterproof and shockproof with IP67
• Safe fire button
• Two buttons on the side for easy adjustment
• Display screen of OLED Color
• Hole to accommodate airways
• Access panel that is made with hinged bottom battery
• 510 Connection that is Gold-plated
• Micro USB Port
• Available in multi-color

Wismec Reuleaux Tinker 2 kit Specifications

• Size: 28.5 x 53.5 x 90 mm
• Weight(without cells): 200.7g
• Maximum charging current: 2A
• Output mode: VW/TCR (M1, M2, M3) /TC-SS/TC-Ti/ TC-Ni mode
• Cell type: 2 X high-rate 18650 cells (discharging current should be above 25A)
• Thread type: 510 spring-loaded connector
• 05-3.5ohm for VW mode
• Output voltage range: 0.5-8V
• Resistance range: 0.05-1.5ohm for TC modes;
• Output wattage: 1-200W

Wismec Reuleaux Tinker 2 kit Package Includes

• 1 X Warning Card
• 1 X User Manual
• 1 X REULEAUX TINKER 2
• 1 X QC USB Cable

What's More On Wismec Reuleaux Tinker Waterproof 2

1. Effective user-interface

The new Wismec Reuleaux Waterproof 2 has a control face with amazing features that come with an easy-to-use fire button. There are also two adjustment buttons along with a port for easy and quick charging, through the micro USB port. The display is the 0.96 inch screen with color. The screen indicates time and date, along with the current wattage available. It also highlights the temperature. More data concerning the consumption of the vape system is possible for the convenience of the user. It has two battery bars that provide adequate power. The dual 18650 cells always work efficiently. There is a new menu bar through which you can check the temperature, power controls, TCK clock, etc. You can also get information regarding your mod and adjust it accordingly.

2. Waterproof, Dustproof, Shockproof

• Shockproof

There are many times our devices stop working if we accidentally drop them. In case you are wondering whether it will happen with this system, know that it is shockproof. The device is safe and sound with the latest shockproof functions to make sure the machine runs smoothly in case of accidental fall.

• Waterproof

TINKER2 meets IP67 requirements. It will continue to work with 1 meter high for as long as 30 minutes.

• Dustproof

The chipboard and other components are dustproof. They can work fine even if they encounter a lot of dirt and sand.

3. Avatar Chip

Tinker 2 is well-designed by Wismec that has installed the latest chipboard. All the components work well to operate at their most beautiful and make sure the work is carried out efficiently. It has a quick speed of 0.001 seconds.

4. Several Safety Measures

The vaping experience must be safe and sound so that users can vape easily with nothing to worry about. The safety precautions include polarity protection with reverse phenomena, temperature control, excess control protection, protection against short-circuit and over-discharge, and much more.

5. Firmware Upgrades

The Tinker 2 Kit comes with the complete set where you will have installed operating system working correctly. The firmware is already installed in your Tinker 2. If users feel like updating their kit, they can easily do that via Wismec site from their computer.

6. Trough Tank

The Trough Tank has 6.5ml e-juice tank with a section installed for bulb glass moderation. Some airways allow natural vapor production and control.

7. How to pour e-juice to your tank?

The juice must be channelled into the hole that is refillable. The slot which is built with silicone stops other e-juice and ensures there is no leakage.